Waterproofing

The range covers every stage where water gets into a building — new construction, wet areas, and repairs on finished surfaces. Waterproofing fails when the product doesn't match the surface and exposure, so the catalogue is organised by application:

• Bathroom and wet-area systems — cementitious and acrylic coatings applied under tiles, on floors and up shower walls.
• Terrace and roof coatings — acrylic and PU liquid membranes that form a seamless UV-resistant layer over the slab.
• Waterproofing admixtures — integral liquid waterproofers added to concrete and plaster at mixing time.
• Crack fillers and repair products — for hairline plaster cracks and larger structural gaps that let water travel.
• Sealants — silicone and PU sealants for joints, window perimeters, and pipe penetrations.

A gotcha worth knowing before you buy: coverage on the datasheet assumes the full number of coats. A terrace system quoted at two coats needs both — a single coat looks finished but leaves pinholes that leak in the first monsoon. Start with types of waterproofing methods to match the system to the job.

We stock Dr. Fixit and the wider Pidilite waterproofing range — the most widely-used names on Indian sites — alongside specialist systems from Fosroc and Weber Saint-Gobain. Every product comes from authorised dealers with full brand guarantee, which matters in a category where a fake or expired drum only reveals itself after the tiles are laid.

A practical tip: within one job, stay inside one brand's system — primer, coating, and protective coat are formulated to bond to each other, and mixing brands across coats is a common cause of delamination. If you're unsure which system fits your surface, send photos over WhatsApp and we'll help you pick.

For a bathroom: waterproof BEFORE tiling — coating over the floor and up the walls, with extra attention to the shower zone, floor-wall junctions, and around drain and pipe penetrations. Once the tiles are on, fixing a missed spot means breaking them out. The step-by-step is in how to waterproof a bathroom.

For a terrace: the surface decides the product. A sound slab takes an acrylic or PU coating directly; an older slab needs cracks cut and filled first, and heavily damaged surfaces need a full membrane system. Slope matters as much as chemistry — water that ponds will eventually find a way through any coating. See the terrace waterproofing guide and, for the most commonly missed spot in apartments, the balcony waterproofing guide.

Tiling a wet area after waterproofing? Use a polymer-modified tile adhesive over the coating — a sand-cement bed doesn't bond reliably to a waterproofing membrane. Our types of tile adhesives guide covers which grade to use.

We deliver across all of Gurgaon — DLF Phases, Golf Course Road, Sohna Road, MG Road, Cyber City, Udyog Vihar, Palam Vihar, Dwarka Expressway, and every sector — in under 60 minutes. Waterproofing is weather-bound work: an applicator with a dry slab and clear sky needs the material NOW, because the same terrace under afternoon rain is a lost day. Fast delivery means the coat goes on in the window that exists.

Doing a full renovation? Add adhesives, cement, and bath accessories to the same delivery.