What Are the Main False Ceiling Materials?
Four false ceiling materials cover nearly every home and office job in Gurgaon: gypsum board on a GI metal frame, POP (Plaster of Paris) on a mesh, PVC panels, and drop-in tiles on a T-grid. Each type has its own material list, so pick the type first and then buy the parts.
Here is the quick difference. Gypsum boards come ready-made from the factory, which speeds up fitting, as UltraTech notes. POP arrives as powder that your mistri mixes and shapes on site. PVC is waterproof and termite resistant, so people use it in bathrooms and kitchens. Grid ceilings with mineral fibre or gypsum tiles suit offices and storerooms, because you can lift one tile to reach the wiring.
One check before you start: UltraTech gives a minimum room height of 8 to 9 feet for a false ceiling. In a low builder flat, measure floor to slab first. A dropped ceiling in a short room makes it feel tight.
Here is the quick difference. Gypsum boards come ready-made from the factory, which speeds up fitting, as UltraTech notes. POP arrives as powder that your mistri mixes and shapes on site. PVC is waterproof and termite resistant, so people use it in bathrooms and kitchens. Grid ceilings with mineral fibre or gypsum tiles suit offices and storerooms, because you can lift one tile to reach the wiring.
One check before you start: UltraTech gives a minimum room height of 8 to 9 feet for a false ceiling. In a low builder flat, measure floor to slab first. A dropped ceiling in a short room makes it feel tight.
What Is on a Gypsum False Ceiling Material List?
A gypsum false ceiling material list has twelve items: gypsum board, perimeter channel, intermediate channel, ceiling section, ceiling angle, connecting clip, soffit cleat, rawl plug, drywall screws, metal-to-metal screws, joint tape and jointing compound. Saint-Gobain Gyproc sells all twelve.
From the slab down:
1. Rawl plug and soffit cleat: anchor the frame into the concrete slab.
2. Ceiling angle: hangs from the cleat and sets the height.
3. Intermediate channel: the primary member that carries the ceiling sections.
4. Connecting clip: joins each ceiling section to the intermediate channel.
5. Ceiling section: the main member that the board screws onto.
6. Perimeter channel: fixed around the walls, where the board ends.
7. Drywall screws fix the board; metal-to-metal screws join the channels.
8. Joint tape and compound hide the board joints.
These roles come from the Gyproc GypSerra framing page and the Gyproc metal accessories page. Tip: ask for the channel brand on the quote.
From the slab down:
1. Rawl plug and soffit cleat: anchor the frame into the concrete slab.
2. Ceiling angle: hangs from the cleat and sets the height.
3. Intermediate channel: the primary member that carries the ceiling sections.
4. Connecting clip: joins each ceiling section to the intermediate channel.
5. Ceiling section: the main member that the board screws onto.
6. Perimeter channel: fixed around the walls, where the board ends.
7. Drywall screws fix the board; metal-to-metal screws join the channels.
8. Joint tape and compound hide the board joints.
These roles come from the Gyproc GypSerra framing page and the Gyproc metal accessories page. Tip: ask for the channel brand on the quote.
What Sizes Do Gypsum Ceiling Channels Come In?
Gyproc GypSerra channels all come in 3660 mm lengths, which is 12 feet. The ceiling section is 80 x 26 x 53 mm, the perimeter channel 20 x 28 x 30 mm, the intermediate channel 15 x 45 x 15 mm and the ceiling angle 25 x 10 mm, per the GypSerra product page.
The coating matters in a damp flat. Gyproc says every GypSerra part now has an Al-Zn coating of 150 GSM, with up to 5 times the corrosion resistance of a Zn-120 GSM coating.
The GypFrame Xpert range gives the steel thickness: 0.4 mm for the ceiling section and perimeter channel, and 0.6 mm for the intermediate channel. Xpert parts come in 2440 mm and 3660 mm lengths.
Quick count for perimeter channel: a 10 x 12 ft bedroom has 44 ft of wall edge. At 12 ft a length, that is 4 lengths, with a small offcut left over. Your fabricator will add a few extra lengths for cutting waste.
The coating matters in a damp flat. Gyproc says every GypSerra part now has an Al-Zn coating of 150 GSM, with up to 5 times the corrosion resistance of a Zn-120 GSM coating.
The GypFrame Xpert range gives the steel thickness: 0.4 mm for the ceiling section and perimeter channel, and 0.6 mm for the intermediate channel. Xpert parts come in 2440 mm and 3660 mm lengths.
Quick count for perimeter channel: a 10 x 12 ft bedroom has 44 ft of wall edge. At 12 ft a length, that is 4 lengths, with a small offcut left over. Your fabricator will add a few extra lengths for cutting waste.
Which Gypsum Board Goes in a False Ceiling?
For a dry room, the standard choice is a 12.5 mm plain gypsum board. Gyproc Gypboard Plain comes in 9.5, 12.5 and 15 mm thickness, 1219 mm wide, and 1829 or 2438 mm long, per the Gypboard Plain page. Gyproc lists it for false ceilings, partitions and drylining, in dry areas only.
A 1219 x 2438 mm board is 4 x 8 ft, or 32 sq ft. So a 100 sq ft bedroom ceiling needs a little over 3 boards. Buy 4, because cut-outs for lights and edges waste some board.
Bathrooms and kitchens need a different board. Gyproc says to use its moisture or water resistant boards in wet areas. The Glasroc-H board is 12.5 mm thick, comes in 1220 x 2440 mm and 1220 x 1830 mm, and Gyproc lists it for bathroom and kitchen ceilings and semi-exposed porch ceilings.
Tip: plain board has grey face paper. If the bathroom board on site is grey, ask the contractor to show you the board label.
A 1219 x 2438 mm board is 4 x 8 ft, or 32 sq ft. So a 100 sq ft bedroom ceiling needs a little over 3 boards. Buy 4, because cut-outs for lights and edges waste some board.
Bathrooms and kitchens need a different board. Gyproc says to use its moisture or water resistant boards in wet areas. The Glasroc-H board is 12.5 mm thick, comes in 1220 x 2440 mm and 1220 x 1830 mm, and Gyproc lists it for bathroom and kitchen ceilings and semi-exposed porch ceilings.
Tip: plain board has grey face paper. If the bathroom board on site is grey, ask the contractor to show you the board label.
Which Screws, Fasteners and Tape Finish a Gypsum Ceiling?
A gypsum ceiling uses three fasteners and two finishing items. Gyproc lists drywall screws of 3.5 x 25, 35 and 50 mm to fix board to frame, metal-to-metal screws of 4.2 x 13 mm to join channels, and 8 x 45 mm rawl plugs to anchor the frame, on its metal accessories page.
HandyPanda lists drywall screws as "gypsum keel". It stocks gypsum keel screws with a fine twin-fast thread, listed from ₹1 on 10 November.
For the joints, Gyproc sells a 50 mm paper tape in 90 m rolls and a self-adhesive fibre tape. Gyproc says to use the fibre tape on vertical work only, per its tapes page. So a ceiling gets paper tape.
The tape sits in a jointing compound such as Gyproc Pro-Fill, sold in 10 kg and 25 kg bags. It is air drying, and drying time depends on temperature and humidity.
HandyPanda lists drywall screws as "gypsum keel". It stocks gypsum keel screws with a fine twin-fast thread, listed from ₹1 on 10 November.
For the joints, Gyproc sells a 50 mm paper tape in 90 m rolls and a self-adhesive fibre tape. Gyproc says to use the fibre tape on vertical work only, per its tapes page. So a ceiling gets paper tape.
The tape sits in a jointing compound such as Gyproc Pro-Fill, sold in 10 kg and 25 kg bags. It is air drying, and drying time depends on temperature and humidity.
What Is on a POP False Ceiling Material List?
A POP false ceiling material list has five items: POP powder, a GI or mild steel frame, a mesh, binding wire, and screws and fixtures. The powder costs ₹250 to ₹400 per 40 kg bag, per a 2026 POP rate guide.
The same guide gives these material rates:
1. POP boards or sheets: ₹30 to ₹60 per sq ft.
2. GI frame or mild steel support: ₹20 to ₹40 per sq ft.
3. Binding wire, screws and fixtures: ₹5 to ₹15 per sq ft.
It puts material at 40 to 50% of the POP bill and labour at 35 to 45%. A skilled POP plasterer charges ₹800 to ₹1,500 a day, and a helper ₹400 to ₹700.
How it goes up: your mistri mixes the powder into a paste on site and applies it onto a mesh, as Gyproc explains. Drying takes time, and the room is covered in plastic. Tip: move the sofa and TV out before POP work starts.
The same guide gives these material rates:
1. POP boards or sheets: ₹30 to ₹60 per sq ft.
2. GI frame or mild steel support: ₹20 to ₹40 per sq ft.
3. Binding wire, screws and fixtures: ₹5 to ₹15 per sq ft.
It puts material at 40 to 50% of the POP bill and labour at 35 to 45%. A skilled POP plasterer charges ₹800 to ₹1,500 a day, and a helper ₹400 to ₹700.
How it goes up: your mistri mixes the powder into a paste on site and applies it onto a mesh, as Gyproc explains. Drying takes time, and the room is covered in plastic. Tip: move the sofa and TV out before POP work starts.
What Is on a Grid Ceiling Material List?
A grid ceiling material list has six items: main T, cross T, wall angle, level clip, soffit cleat with rawl plug, and the ceiling tiles. Each tile lifts out, so offices and server rooms use it.
Per the Gyproc T-grid page:
1. Main T: 3000 mm long, carries the weight of the grid.
2. Cross T: 600 or 1200 mm long, locks into the main Ts to make the squares.
3. Wall angle: 3000 mm long, fixed around the room at ceiling level.
4. Level clip: a butterfly clip on a 4 mm wire rod; hangs the main T.
5. Soffit cleat and 8 x 45 mm rawl plug: hold the clip to the slab.
In the Matrix range, the main T is 24 mm wide and 0.3 mm thick, and the wall angle is 0.4 mm thick. Tip: keep two spare tiles from the same batch. A new batch can differ in shade.
Per the Gyproc T-grid page:
1. Main T: 3000 mm long, carries the weight of the grid.
2. Cross T: 600 or 1200 mm long, locks into the main Ts to make the squares.
3. Wall angle: 3000 mm long, fixed around the room at ceiling level.
4. Level clip: a butterfly clip on a 4 mm wire rod; hangs the main T.
5. Soffit cleat and 8 x 45 mm rawl plug: hold the clip to the slab.
In the Matrix range, the main T is 24 mm wide and 0.3 mm thick, and the wall angle is 0.4 mm thick. Tip: keep two spare tiles from the same batch. A new batch can differ in shade.
How Much Does a False Ceiling Cost per Sq Ft?
A plain gypsum false ceiling costs about ₹70 to ₹78 per sq ft, and a plain POP ceiling about ₹75 to ₹120 per sq ft. Design Cafe puts gypsum at ₹78 per sq ft in its September 2026 cost guide, and Gyproc gives an average of ₹70 per sq ft.
Design Cafe rates per sq ft:
1. Gypsum board: ₹78.
2. POP: ₹75 to ₹120.
3. PVC: ₹70 to ₹160.
4. Grid and mineral fibre: ₹85 to ₹150.
5. Wood or wood finish: ₹500 to ₹1,200.
At ₹78, a 100 sq ft bedroom ceiling costs ₹7,800 and a 120 sq ft one costs ₹9,360. For Delhi NCR, the POP rate guide gives ₹80 to ₹120 per sq ft for a plain POP ceiling and ₹150 to ₹280 for a designer one.
Tip from Design Cafe: check in writing whether the quote covers material, frame, labour, finishing, paint, electrical work and GST. Some quotes cover labour only.
Design Cafe rates per sq ft:
1. Gypsum board: ₹78.
2. POP: ₹75 to ₹120.
3. PVC: ₹70 to ₹160.
4. Grid and mineral fibre: ₹85 to ₹150.
5. Wood or wood finish: ₹500 to ₹1,200.
At ₹78, a 100 sq ft bedroom ceiling costs ₹7,800 and a 120 sq ft one costs ₹9,360. For Delhi NCR, the POP rate guide gives ₹80 to ₹120 per sq ft for a plain POP ceiling and ₹150 to ₹280 for a designer one.
Tip from Design Cafe: check in writing whether the quote covers material, frame, labour, finishing, paint, electrical work and GST. Some quotes cover labour only.
Gypsum or POP: Which Suits Your Room?
Gypsum board suits flat and cove ceilings in bedrooms and living rooms, and POP suits curved and moulded designs. POP is cheap as a material, but the labour cost can get very high, as Gyproc notes. POP is mixed at your home and makes a mess. Gypsum board goes up dry.
A room-by-room guide:
1. Living room and bedroom: gypsum board, with a cove for strip lights.
2. Curved or moulded designer ceiling: POP.
3. Bathroom: moisture resistant gypsum board or PVC panels.
4. Kitchen: moisture resistant gypsum board or PVC. See our modular kitchen materials list for the rest of the kitchen.
5. Home office or storeroom: grid ceiling, for access to wires.
Gyproc says a gypsum ceiling lasts more than two decades under normal conditions. A continuous water leak shortens that. Tip: fix any seepage in the slab above before the frame goes up.
A room-by-room guide:
1. Living room and bedroom: gypsum board, with a cove for strip lights.
2. Curved or moulded designer ceiling: POP.
3. Bathroom: moisture resistant gypsum board or PVC panels.
4. Kitchen: moisture resistant gypsum board or PVC. See our modular kitchen materials list for the rest of the kitchen.
5. Home office or storeroom: grid ceiling, for access to wires.
Gyproc says a gypsum ceiling lasts more than two decades under normal conditions. A continuous water leak shortens that. Tip: fix any seepage in the slab above before the frame goes up.
Which Lights and Cut-Outs Go Into a False Ceiling?
Recessed LED downlights and panel lights go into a false ceiling, along with access panels for AC and wiring. Fix the light positions before the boards go up. Your electrician runs the wires above the frame, and the board gets a round cut-out at each point.
Two recessed lights that HandyPanda stocks:
1. The Polycab 6W concealed downlight, a round LED panel, ₹104 on 10 November.
2. The Orient recess panel light, in 6W, 12W and 18W, ₹184 on 10 November.
For AC drain pipes and junction boxes above the ceiling, Gyproc sells access panels in 600 x 600 and 600 x 1200 mm, per its accessories page. Pro-Fill compound also fills small cut-outs that go wrong.
Tip: mark each light on the slab with chalk while the electrician is there. After the jointing dries, the ceiling gets primer and paint, like the walls in our 2BHK painting cost guide.
Two recessed lights that HandyPanda stocks:
1. The Polycab 6W concealed downlight, a round LED panel, ₹104 on 10 November.
2. The Orient recess panel light, in 6W, 12W and 18W, ₹184 on 10 November.
For AC drain pipes and junction boxes above the ceiling, Gyproc sells access panels in 600 x 600 and 600 x 1200 mm, per its accessories page. Pro-Fill compound also fills small cut-outs that go wrong.
Tip: mark each light on the slab with chalk while the electrician is there. After the jointing dries, the ceiling gets primer and paint, like the walls in our 2BHK painting cost guide.
