What Is the Full Wardrobe Material List?
A wooden wardrobe needs eight materials: plywood for the carcass (the box), board for the shutters, a thin back panel, a laminate finish, edge band tape, hinges, drawer channels with handles, and wood adhesive.
Here is the list, part by part:
1. Carcass: 18 or 19 mm plywood for sides, top, bottom, shelves and partitions.
2. Shutters: plywood, MDF or HDHMR board.
3. Back panel: 6 mm plywood.
4. Finish: 0.8 or 1 mm laminate on every face.
5. Edges: PVC edge band tape on every cut edge.
6. Hinges: soft-close or regular, 2 to 4 per door.
7. Drawer channels, handles and an optional lock.
8. Adhesive: a synthetic resin wood glue.
These thickness splits follow Greenply wardrobe plywood guide. Tip: ask your carpenter for a cutting list with the size of every panel. It tells you the exact sheet count, so you do not over-order.
Here is the list, part by part:
1. Carcass: 18 or 19 mm plywood for sides, top, bottom, shelves and partitions.
2. Shutters: plywood, MDF or HDHMR board.
3. Back panel: 6 mm plywood.
4. Finish: 0.8 or 1 mm laminate on every face.
5. Edges: PVC edge band tape on every cut edge.
6. Hinges: soft-close or regular, 2 to 4 per door.
7. Drawer channels, handles and an optional lock.
8. Adhesive: a synthetic resin wood glue.
These thickness splits follow Greenply wardrobe plywood guide. Tip: ask your carpenter for a cutting list with the size of every panel. It tells you the exact sheet count, so you do not over-order.
Which Plywood Is Good for a Wardrobe: MR, BWR or BWP?
For a bedroom wardrobe on a dry wall, MR grade plywood to IS 303 does the job. If the wardrobe shares a wall with a bathroom or sits on a damp ground floor, step up to BWR or BWP.
The Greenply grade comparison gives the split. MR uses urea-formaldehyde glue and costs the least. BWR and BWP use phenol-formaldehyde glue, which handles water better. MR suits bedrooms and TV units, BWR suits semi-humid rooms, and BWP suits kitchens and bathroom vanities.
The standards moved recently. IS 303 used to cover only MR and BWR, but BIS amended it to add a BWP grade for interior plywood, as Ply Reporter reported in June 2024. IS 710 is the marine standard. So check both the IS number and the grade word on the stamp. Our guide on how to read a plywood ISI mark shows where to look. Tip: read the stamp on the sheet before the carpenter cuts it.
The Greenply grade comparison gives the split. MR uses urea-formaldehyde glue and costs the least. BWR and BWP use phenol-formaldehyde glue, which handles water better. MR suits bedrooms and TV units, BWR suits semi-humid rooms, and BWP suits kitchens and bathroom vanities.
The standards moved recently. IS 303 used to cover only MR and BWR, but BIS amended it to add a BWP grade for interior plywood, as Ply Reporter reported in June 2024. IS 710 is the marine standard. So check both the IS number and the grade word on the stamp. Our guide on how to read a plywood ISI mark shows where to look. Tip: read the stamp on the sheet before the carpenter cuts it.
Which mm Plywood Is Used for a Wardrobe?
Use 18 or 19 mm plywood for the carcass and shelves, 12 to 18 mm for shutters, and 6 mm for the back panel. Thick ply carries weight and holds screws.
The Greenply wardrobe guide lists 18 mm for the main structure and shelves, 12 mm for shutters and partitions, and 6 mm for back panels and drawer bases. A separate Greenply material comparison says to use at least 19 mm ply for frames and shelves, and calls 18 mm standard for MDF shutters.
Why the range? A 12 mm shutter is lighter and cheaper, so it may need fewer hinges. An 18 mm shutter is heavier but stiffer over a 7 ft height. Ask your carpenter which one he has hung at that height before. If a shelf span looks long, add a partition in the middle instead of going thinner. Tip: keep the carcass and shelves in one brand and one batch, so the thickness matches when your carpenter joins panels.
The Greenply wardrobe guide lists 18 mm for the main structure and shelves, 12 mm for shutters and partitions, and 6 mm for back panels and drawer bases. A separate Greenply material comparison says to use at least 19 mm ply for frames and shelves, and calls 18 mm standard for MDF shutters.
Why the range? A 12 mm shutter is lighter and cheaper, so it may need fewer hinges. An 18 mm shutter is heavier but stiffer over a 7 ft height. Ask your carpenter which one he has hung at that height before. If a shelf span looks long, add a partition in the middle instead of going thinner. Tip: keep the carcass and shelves in one brand and one batch, so the thickness matches when your carpenter joins panels.
How Many Plywood Sheets Does a 7 x 7 Ft Wardrobe Need?
A 7 ft wide, 7 ft high, 2 ft deep wardrobe needs about 5 to 6 sheets of 18 or 19 mm plywood and 2 sheets of 6 mm for the back.
Here is the working. A standard sheet is 8 x 4 ft, which is 32 sq ft, the size Greenlam gives for its sheets.
1. Two sides at 7 x 2 ft: 28 sq ft.
2. Top and bottom at 7 x 2 ft: 28 sq ft.
3. Two partitions at 7 x 2 ft: 28 sq ft.
4. Six shelves at about 2.3 x 2 ft: 28 sq ft.
5. Shutters covering the 7 x 7 ft front: 49 sq ft.
That is 161 sq ft, just over 5 sheets, so order 6 to cover cutting waste. The 49 sq ft back needs 2 sheets of 6 mm. Tip: if your shutters are MDF, take the 49 sq ft out of the plywood count and order board instead.
Here is the working. A standard sheet is 8 x 4 ft, which is 32 sq ft, the size Greenlam gives for its sheets.
1. Two sides at 7 x 2 ft: 28 sq ft.
2. Top and bottom at 7 x 2 ft: 28 sq ft.
3. Two partitions at 7 x 2 ft: 28 sq ft.
4. Six shelves at about 2.3 x 2 ft: 28 sq ft.
5. Shutters covering the 7 x 7 ft front: 49 sq ft.
That is 161 sq ft, just over 5 sheets, so order 6 to cover cutting waste. The 49 sq ft back needs 2 sheets of 6 mm. Tip: if your shutters are MDF, take the 49 sq ft out of the plywood count and order board instead.
Plywood, MDF, HDHMR or PVC: Which Wardrobe Material Suits Your Room?
Plywood suits the carcass and load-bearing shelves. MDF suits painted or smooth shutters in dry rooms. HDHMR suits damp rooms, and PVC board suits wet areas. Many wardrobes mix two of them: plywood for the box, plus one board type for the doors.
The Greenply comparison of wardrobe boards rates them this way:
1. Plywood (BWP): high moisture resistance, top-rated screw holding, used for carcass and shelves.
2. MDF: low to medium moisture resistance, moderate screw holding, a very smooth surface for shutters.
3. HDHMR: high moisture resistance, good screw holding, used near bathrooms.
4. PVC sheet: fully waterproof and light, but heavy shelves need extra support.
HandyPanda stocks Greenply MDF in 17 mm, 8 x 4 ft at ₹1,876 a sheet on 10 November. For a deeper look at board types, read MDF vs plywood vs particle board. Tip: MDF swells if water reaches a raw edge, so seal every cut edge with edge band tape the same day.
The Greenply comparison of wardrobe boards rates them this way:
1. Plywood (BWP): high moisture resistance, top-rated screw holding, used for carcass and shelves.
2. MDF: low to medium moisture resistance, moderate screw holding, a very smooth surface for shutters.
3. HDHMR: high moisture resistance, good screw holding, used near bathrooms.
4. PVC sheet: fully waterproof and light, but heavy shelves need extra support.
HandyPanda stocks Greenply MDF in 17 mm, 8 x 4 ft at ₹1,876 a sheet on 10 November. For a deeper look at board types, read MDF vs plywood vs particle board. Tip: MDF swells if water reaches a raw edge, so seal every cut edge with edge band tape the same day.
Which Wardrobe Shutter Finish Costs Less: Laminate, Veneer, Acrylic or PU?
Laminate is the lowest-cost wardrobe finish, at ₹350 to 650 per sq ft of shutter. Veneer runs ₹600 to 1,100, acrylic ₹900 to 1,500 and PU paint ₹1,000 to 1,800.
The full set of rates is in the NoBroker wardrobe price guide, which also lists membrane at ₹500 to 850 and glass or mirror at ₹700 to 1,400 per sq ft. For a 7 x 7 ft front, that is 49 sq ft, so the gap between laminate and PU on one wardrobe runs into tens of thousands of rupees.
Laminate sheets come 8 x 4 ft. Greenlam sells 1 mm and 1.5 mm decorative laminates, and 0.8 mm sheets are also sold. HandyPanda stocks a CK 0.8 mm laminate, 8 x 4 ft at ₹1,039 a sheet on 10 November. Tip: buy all shutter laminate in one order, and hold a sample against the room light before your carpenter starts pasting.
The full set of rates is in the NoBroker wardrobe price guide, which also lists membrane at ₹500 to 850 and glass or mirror at ₹700 to 1,400 per sq ft. For a 7 x 7 ft front, that is 49 sq ft, so the gap between laminate and PU on one wardrobe runs into tens of thousands of rupees.
Laminate sheets come 8 x 4 ft. Greenlam sells 1 mm and 1.5 mm decorative laminates, and 0.8 mm sheets are also sold. HandyPanda stocks a CK 0.8 mm laminate, 8 x 4 ft at ₹1,039 a sheet on 10 November. Tip: buy all shutter laminate in one order, and hold a sample against the room light before your carpenter starts pasting.
How Many Hinges Does a Wardrobe Door Need?
A short wardrobe door up to about 6 kg needs 2 hinges, a door of 6 to 12 kg needs 3, and a full-height door of around 7 to 8 ft usually needs 4.
The Blum hinge guide gives 2 hinges for doors of 4 to 6 kg and 3 hinges for 6 to 12 kg, for doors up to 600 mm wide. It adds one more hinge for doors up to 650 mm wide, and a third hinge for tall, narrow doors even below 6 kg. IKEA uses 3 hinges on a 201 cm wardrobe door and 4 on a 236 cm door.
Soft-close hinges stop shutters from slamming. The Hettich Onsys has the soft-close built into the hinge, opens to 105 degrees and is tested for 40,000 cycles. HandyPanda stocks the Hettich Onsys 4447i hinge at ₹236 for the 0-crank (full overlay) size on 10 November. Our post on soft-close vs regular hinges covers the cost difference.
The Blum hinge guide gives 2 hinges for doors of 4 to 6 kg and 3 hinges for 6 to 12 kg, for doors up to 600 mm wide. It adds one more hinge for doors up to 650 mm wide, and a third hinge for tall, narrow doors even below 6 kg. IKEA uses 3 hinges on a 201 cm wardrobe door and 4 on a 236 cm door.
Soft-close hinges stop shutters from slamming. The Hettich Onsys has the soft-close built into the hinge, opens to 105 degrees and is tested for 40,000 cycles. HandyPanda stocks the Hettich Onsys 4447i hinge at ₹236 for the 0-crank (full overlay) size on 10 November. Our post on soft-close vs regular hinges covers the cost difference.
Which Drawer Channels, Handles and Edge Band Does a Wardrobe Use?
A wardrobe drawer uses a pair of ball-bearing telescopic channels sized to the drawer depth, usually 18 inch for a 2 ft deep wardrobe. Add one handle per shutter and drawer, and PVC edge band tape on every exposed cut edge of ply or board.
Channels: check the load rating. HandyPanda stocks the Hettich full-extension channel, 450 mm (18 inch) long with a 45 kg load capacity, at ₹341 for the 18-inch size on 10 November.
Edge band: REHAU edgebands come in PVC, ABS and PMMA, in 0.8, 1, 1.3 and 2 mm thickness and 22 to 45 mm width. The 22 mm width covers an 18 or 19 mm board edge with a little to trim.
Handles: profile handles cut into the shutter top need no screws on the face, while knobs and bar handles are easy to replace later. Tip: decide the handle before the carpenter edge-bands the shutters, because a profile handle needs a groove.
Channels: check the load rating. HandyPanda stocks the Hettich full-extension channel, 450 mm (18 inch) long with a 45 kg load capacity, at ₹341 for the 18-inch size on 10 November.
Edge band: REHAU edgebands come in PVC, ABS and PMMA, in 0.8, 1, 1.3 and 2 mm thickness and 22 to 45 mm width. The 22 mm width covers an 18 or 19 mm board edge with a little to trim.
Handles: profile handles cut into the shutter top need no screws on the face, while knobs and bar handles are easy to replace later. Tip: decide the handle before the carpenter edge-bands the shutters, because a profile handle needs a groove.
Which Adhesive Do Carpenters Use for Wardrobe Plywood and Laminate?
Use a synthetic resin wood adhesive, such as Fevicol SH, for plywood joints and for pasting laminate on ply. Glue works with the screws or nails at every carcass joint, not instead of them, and it bonds laminate to the board face.
Fevicol is a Pidilite brand, and Fevicol SH is a synthetic resin adhesive used for wood, plywood, laminate, veneers and MDF. HandyPanda stocks Fevicol SH at ₹167 for the 500 g pack on 10 November, with packs up to 50 kg for big jobs.
How much to buy? It depends on how much laminate your carpenter presses, because laminate pasting uses far more glue than joints. Ask him to estimate the kilos from the cutting list, then buy one larger pack instead of many small ones.
Tip: laminate needs pressure while the glue sets. Ask your carpenter to stack weights or clamp the pasted shutters flat overnight, and to hang them only after that.
Fevicol is a Pidilite brand, and Fevicol SH is a synthetic resin adhesive used for wood, plywood, laminate, veneers and MDF. HandyPanda stocks Fevicol SH at ₹167 for the 500 g pack on 10 November, with packs up to 50 kg for big jobs.
How much to buy? It depends on how much laminate your carpenter presses, because laminate pasting uses far more glue than joints. Ask him to estimate the kilos from the cutting list, then buy one larger pack instead of many small ones.
Tip: laminate needs pressure while the glue sets. Ask your carpenter to stack weights or clamp the pasted shutters flat overnight, and to hang them only after that.
How Much Does a 7 Ft Wardrobe Cost in Gurgaon?
A 7 ft high, 6 ft wide wardrobe costs about ₹30,000 to 45,000 at budget level, ₹50,000 to 70,000 mid-range, and ₹75,000 to 1,00,000 premium, as finished work. An 8 ft wide wardrobe at mid-range runs ₹65,000 to 90,000.
These figures come from the NoBroker wardrobe price guide (May 2026), which also prices the core material per sq ft of wardrobe front: particle board ₹700 to 1,000, MDF ₹800 to 1,100, BWR plywood ₹1,200 to 1,700 and marine plywood ₹1,600 to 2,200. It puts metro cities 15 to 25% above tier-2 cities, and adds 15 to 25% for 8 to 9 ft tall wardrobes. Hardware alone (hinges, channels, drawer systems, handles) is ₹5,000 to 40,000.
Buying materials yourself and paying the carpenter for labour lets you see each price. HandyPanda delivers plywood, laminates, hinges, channels and Fevicol to eligible addresses in Gurugram, Dwarka and Noida. The app shows the delivery time for your address. Tip: get the labour quote in writing per running foot before materials arrive.
These figures come from the NoBroker wardrobe price guide (May 2026), which also prices the core material per sq ft of wardrobe front: particle board ₹700 to 1,000, MDF ₹800 to 1,100, BWR plywood ₹1,200 to 1,700 and marine plywood ₹1,600 to 2,200. It puts metro cities 15 to 25% above tier-2 cities, and adds 15 to 25% for 8 to 9 ft tall wardrobes. Hardware alone (hinges, channels, drawer systems, handles) is ₹5,000 to 40,000.
Buying materials yourself and paying the carpenter for labour lets you see each price. HandyPanda delivers plywood, laminates, hinges, channels and Fevicol to eligible addresses in Gurugram, Dwarka and Noida. The app shows the delivery time for your address. Tip: get the labour quote in writing per running foot before materials arrive.
